Factory size of Dongfeng S500 wheels and tolerances
Information updated on Jun. 12, 2022, 11:23S500 models were produced by Dongfeng from 2015 to 2017. There were 2 modifications of this car in total:
The manufacturer Dongfeng installed discs with a diameter of 15 to 16 inches on the S500 model. On this model, you can install 9 disk options, of which 9 factory and 0 are valid.
Dongfeng S500: table of standard and permissible disk sizes
The table below shows all the parameters of Dongfeng S500 wheels that were produced in 2015-2017.
Legend of the table (parameters of PCD and offset of Dongfeng S500 discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 1.5 | 2015 | 6Jx15 5/114.3 ET45 d60.1 | 15 | 5X114.3 | 6 | 45 | 60.1 | Factory |
| 1.5 | 2015 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 1.6 | 2015 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 1.5 | 2016 | 6Jx15 5/114.3 ET45 d60.1 | 15 | 5X114.3 | 6 | 45 | 60.1 | Factory |
| 1.5 | 2016 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 1.6 | 2016 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 1.5 | 2017 | 6Jx15 5/114.3 ET45 d60.1 | 15 | 5X114.3 | 6 | 45 | 60.1 | Factory |
| 1.5 | 2017 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |
| 1.6 | 2017 | 6.5Jx16 5/114.3 ET49 d60.1 | 16 | 5X114.3 | 6.5 | 49 | 60.1 | Factory |