Factory size of Honda Ballade wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Ballade models were produced by Honda from 2014 to 2019. There were 2 modifications of this car in total:
The manufacturer Honda installed discs with a diameter of 15 to 16 inches on the Ballade model. On this model, you can install 12 disk options, of which 6 factory and 6 are valid.
Honda Ballade: table of standard and permissible disk sizes
The table below shows all the parameters of Honda Ballade wheels that were produced in 2014-2019.
Legend of the table (parameters of PCD and offset of Honda Ballade discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.5i GM6 | 2014 | 5.5Jx15 4/100 ET51 d56.1 | 15 | 4X100 | 5.5 | 51 | 56.1 | Factory |
1.5i GM6 | 2014 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Allowable |
1.5i GM6 | 2015 | 5.5Jx15 4/100 ET51 d56.1 | 15 | 4X100 | 5.5 | 51 | 56.1 | Factory |
1.5i GM6 | 2015 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Allowable |
1.5i GM6 | 2016 | 5.5Jx15 4/100 ET51 d56.1 | 15 | 4X100 | 5.5 | 51 | 56.1 | Factory |
1.5i GM6 | 2016 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Allowable |
1.5i GM6 | 2017 | 5.5Jx15 4/100 ET51 d56.1 | 15 | 4X100 | 5.5 | 51 | 56.1 | Factory |
1.5i GM6 | 2017 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Allowable |
1.5i GM6 Restyling | 2018 | 5.5Jx15 4/100 ET51 d56.1 | 15 | 4X100 | 5.5 | 51 | 56.1 | Factory |
1.5i GM6 Restyling | 2018 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Allowable |
1.5i GM6 Restyling | 2019 | 5.5Jx15 4/100 ET51 d56.1 | 15 | 4X100 | 5.5 | 51 | 56.1 | Factory |
1.5i GM6 Restyling | 2019 | 6Jx16 4/100 ET53 d56.1 | 16 | 4X100 | 6 | 53 | 56.1 | Allowable |