Factory size of Honda Z wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Z models were produced by Honda from 1998 to 2002. There were 2 modifications of this car in total:
The manufacturer Honda installed discs with a diameter of 15 to 15 inches on the Z model. On this model, you can install 10 disk options, of which 10 factory and 0 are valid.
Honda Z: table of standard and permissible disk sizes
The table below shows all the parameters of Honda Z wheels that were produced in 1998-2002.
Legend of the table (parameters of PCD and offset of Honda Z discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
| Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
|---|---|---|---|---|---|---|---|---|
| 0.7 (GF-PA1) | 1998 | 5Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 5 | 45 | 64.1 | Factory |
| 0.7 Turbo (GF-PA1) | 1998 | 5Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 5 | 45 | 64.1 | Factory |
| 0.7 (GF-PA1) | 1999 | 5Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 5 | 45 | 64.1 | Factory |
| 0.7 Turbo (GF-PA1) | 1999 | 5Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 5 | 45 | 64.1 | Factory |
| 0.7 (GF-PA1) | 2000 | 5Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 5 | 45 | 64.1 | Factory |
| 0.7 Turbo (GF-PA1) | 2000 | 5Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 5 | 45 | 64.1 | Factory |
| 0.7 (GF-PA1) | 2001 | 5Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 5 | 45 | 64.1 | Factory |
| 0.7 Turbo (GF-PA1) | 2001 | 5Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 5 | 45 | 64.1 | Factory |
| 0.7 (GF-PA1) | 2002 | 5Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 5 | 45 | 64.1 | Factory |
| 0.7 Turbo (GF-PA1) | 2002 | 5Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 5 | 45 | 64.1 | Factory |