Factory size of Honda Odyssey Prestige wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Odyssey Prestige models were produced by Honda from 1997 to 1999. There were 2 modifications of this car in total:
The manufacturer Honda installed discs with a diameter of 15 to 16 inches on the Odyssey Prestige model. On this model, you can install 8 disk options, of which 4 factory and 4 are valid.
Honda Odyssey Prestige: table of standard and permissible disk sizes
The table below shows all the parameters of Honda Odyssey Prestige wheels that were produced in 1997-1999.
Legend of the table (parameters of PCD and offset of Honda Odyssey Prestige discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
3.0i (E-RA5) | 1997 | 6Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 6 | 45 | 64.1 | Factory |
3.0i (E-RA5) | 1997 | 7Jx16 5/114.3 ET45 d64.1 | 16 | 5X114.3 | 7 | 45 | 64.1 | Allowable |
3.0i (E-RA5) | 1998 | 6Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 6 | 45 | 64.1 | Factory |
3.0i (E-RA5) | 1998 | 7Jx16 5/114.3 ET45 d64.1 | 16 | 5X114.3 | 7 | 45 | 64.1 | Allowable |
3.0i (GF-RA5) | 1998 | 6Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 6 | 45 | 64.1 | Factory |
3.0i (GF-RA5) | 1998 | 7Jx16 5/114.3 ET45 d64.1 | 16 | 5X114.3 | 7 | 45 | 64.1 | Allowable |
3.0i (GF-RA5) | 1999 | 6Jx15 5/114.3 ET45 d64.1 | 15 | 5X114.3 | 6 | 45 | 64.1 | Factory |
3.0i (GF-RA5) | 1999 | 7Jx16 5/114.3 ET45 d64.1 | 16 | 5X114.3 | 7 | 45 | 64.1 | Allowable |