Factory size of Honda Integra SJ wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Integra SJ models were produced by Honda from 1996 to 2001. There were 3 modifications of this car in total:
The manufacturer Honda installed discs with a diameter of 13 to 14 inches on the Integra SJ model. On this model, you can install 12 disk options, of which 7 factory and 5 are valid.
Honda Integra SJ: table of standard and permissible disk sizes
The table below shows all the parameters of Honda Integra SJ wheels that were produced in 1996-2001.
Legend of the table (parameters of PCD and offset of Honda Integra SJ discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
1.5 (E-EK3) | 1996 | 5Jx13 4/100 ET45 d56.1 | 13 | 4X100 | 5 | 45 | 56.1 | Factory |
1.5 (E-EK3) | 1997 | 5Jx13 4/100 ET45 d56.1 | 13 | 4X100 | 5 | 45 | 56.1 | Factory |
1.5 (GF-EK3) | 1998 | 5Jx13 4/100 ET45 d56.1 | 13 | 4X100 | 5 | 45 | 56.1 | Factory |
1.5 (GF-EK3) | 1998 | 5Jx14 4/100 ET45 d56.1 | 14 | 4X100 | 5 | 45 | 56.1 | Allowable |
1.5 (GF-EK3) | 1999 | 5Jx13 4/100 ET45 d56.1 | 13 | 4X100 | 5 | 45 | 56.1 | Factory |
1.5 (GF-EK3) | 1999 | 5Jx14 4/100 ET45 d56.1 | 14 | 4X100 | 5 | 45 | 56.1 | Allowable |
1.5 (GH-EK3) | 1999 | 5Jx13 4/100 ET45 d56.1 | 13 | 4X100 | 5 | 45 | 56.1 | Factory |
1.5 (GH-EK3) | 1999 | 5Jx14 4/100 ET45 d56.1 | 14 | 4X100 | 5 | 45 | 56.1 | Allowable |
1.5 (GH-EK3) | 2000 | 5Jx13 4/100 ET45 d56.1 | 13 | 4X100 | 5 | 45 | 56.1 | Factory |
1.5 (GH-EK3) | 2000 | 5Jx14 4/100 ET45 d56.1 | 14 | 4X100 | 5 | 45 | 56.1 | Allowable |
1.5 (GH-EK3) | 2001 | 5Jx13 4/100 ET45 d56.1 | 13 | 4X100 | 5 | 45 | 56.1 | Factory |
1.5 (GH-EK3) | 2001 | 5Jx14 4/100 ET45 d56.1 | 14 | 4X100 | 5 | 45 | 56.1 | Allowable |