Factory size of Honda Beat wheels and tolerances
Information updated on Jun. 12, 2022, 11:23Beat models were produced by Honda from 1991 to 1996. There were 1 modifications of this car in total:
The manufacturer Honda installed discs with a diameter of 13 to 13 inches on the Beat model. On this model, you can install 6 disk options, of which 6 factory and 0 are valid.
Honda Beat: table of standard and permissible disk sizes
The table below shows all the parameters of Honda Beat wheels that were produced in 1991-1996.
Legend of the table (parameters of PCD and offset of Honda Beat discs):
- DIA (hole diameter)
- LZ (number of holes)
- PCD (hole circle diameter)
- ET (disk indent)
Modification | Production year | General parameters | Wheel diameter | PCD | Wheel width | ET (disk indent) | DIA (diameter) | Type of install |
---|---|---|---|---|---|---|---|---|
0.7 (E-PP1) | 1991 | 4.5Jx13 4/100 ET35 d60.1 | 13 | 4X100 | 4.5 | 35 | 60.1 | Factory |
0.7 (E-PP1) | 1992 | 4.5Jx13 4/100 ET35 d60.1 | 13 | 4X100 | 4.5 | 35 | 60.1 | Factory |
0.7 (E-PP1) | 1993 | 4.5Jx13 4/100 ET35 d60.1 | 13 | 4X100 | 4.5 | 35 | 60.1 | Factory |
0.7 (E-PP1) | 1994 | 4.5Jx13 4/100 ET35 d60.1 | 13 | 4X100 | 4.5 | 35 | 60.1 | Factory |
0.7 (E-PP1) | 1995 | 4.5Jx13 4/100 ET35 d60.1 | 13 | 4X100 | 4.5 | 35 | 60.1 | Factory |
0.7 (E-PP1) | 1996 | 4.5Jx13 4/100 ET35 d60.1 | 13 | 4X100 | 4.5 | 35 | 60.1 | Factory |